Turbovac/Hydro-Trencher
Premier Hydro Excavating System

- Turbovac/Hydro-Trencher -

• Ideal for installing, uncovering or repairing gas lines, fibre optic cables and other utility lines

• Designed for directional boring and removing liquids, sludges and solids i.e. mud, slurry and gravel

• High-pressure jetting system (23 GPM @ 3000 PSI) water pump

• Heavy duty hydraulic vibrator assembly with variable speed control

• Positive displacement blower: 2600 - 5300 CFM, 27” Hg maximum vacuum

• Options available i.e., hot water system 700,000 or 980,000 BTU/hr burner with auxiliary generator, hot water
system heated cabinet, hydraulic boom assembly, pressure unloading system, trailer mounted units, accessories,
etc.

 
CHASIS DATA :
Noise Level 9 ft. distance: 92 dbA
Maximum CFM Blower: 2600
CFM @ 15”: 438
Maximum Vacuum: 27" Hg
Maximum Pressure PSI: 15
Clear CA: 172"
Required Front Axle: 18,000 lb.
Required Rear Axle: 46,000 lb.
Horsepower: 300
Transmission requirements: Overdrive w/cooler
   
Tank Material: Head: 0.250” 44W
Shell: 0.250” 44W
Diameter: 78"
Blower: Airflow: 2600-5300 CFM Max Vacuum: 28”Hg
Shut-off: Primary: 12” SS float ball assy with 8” rubber seat
Filtration: Single or dual 8” cyclone assemblies with 100 micron blower inlet filter
Liquid Level Indicator: SS rotary float gauge with 6” SS float ball and sight cage assy
Blower Piping: Single or dual 8” diam with quick disconnect rubber boot assy
6” manual vacuum relief valve with 10” or 12” check valve
Blower Silencers: Intake: 10” or 12” absorption Exhaust: 10” or 12” chamber
Valves: Suction/Discharge: 6” Betts air operated/spring closing
Dump System: Hydraulic: 30 ton capacity 120” stroke, 3 stage
Rear Door: Hydraulic: full opening with 6 heavy duty wing clamps
Vibrator: Hydraulic: mounted bottom of tank
 
-->
Main | News | About | Products | Parts/Accessories | Warranty | Resources | Certifications | Customer Service | Testimonials | Contact
© Copyright 2005-2006 Wastequip CUSCO. All Rights Reserved. Designed by Pixascope